The best option is to use the Reese Goose Box # RP94716-61301 as this is currently the only replacement pin box approved by Lippert to not void the frame warranty on your 5th wheel camper. Do understand that this pin box does have a maximum trailer capacity of 16,000lbs so it will only slightly reduce your maximum loaded capacity.
You will need the Safety Chain Kit # RP49151 since you are switching to a ball connection and all ball connections require safety chains by law. view full answer...
The only replacement hardware we carry for the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1320 which fits your 2020 Ram 2500 is the Safety Chain U-Bolt Kit # BW1900-2-1600. Since you need the bolt bag with the installation hardware you will want to contact B&W directly. view full answer...
Thanks so much for that info Tyler, and I was able to find the right Gen-Y gooseneck pin box for you. Since you have the Lippert Rhino on your 2024 Jayco Eagle 355MBQS, the right option is the following:
- Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box # GY33GR
The # GY33GR is the correct replacement for the Rhino, and is for loaded pin weights between 2,500 lbs and 4,500 lbs, which is perfect for the 15,200 lb GVWR of your Eagle 355MBQS; with that GVWR your pin weight will... view full answer...
Based on what you mentioned you do have a Blue Ox base plate kit installed on your 2008 Volkswagen New Beetle so the correct replacement tab assembly set is the part # BLU37XR. view full answer...
Typically when the frame brackets for the Reese Weight Distribution # RP66020 can't be used they switch to the Bolt On Hangers # RP58305. I have seen some weld the brackets onto the trailer but as Reese did not design the brackets to be used in that manner I cannot give you any details on how much of the bracket needs to be welded. It shouldn't take much but they need to be secured in place to not slide on the frame or lift from the top rail.
We do have the Replacement U-Bolts # RP58032... view full answer...
Reese got rid of a lot of the older weight distribution replacement parts a few years back when they went and updated most of the lines that they offered so there isn't going to be the replacement parts you are looking for. So it would be best to replace the entire system Bob.
A system like the Reese part # RP66542 would work great as it has a tongue weight range of 600-1,200 lbs which should match what your camper has well. view full answer...